Retractable Webbing Inertia Reel (Sharp Edge Tested) – 915344 | 915342

The ideal position of a Retractable Block when used as a part of personal Fall Arrest System, is directly overhead, or to an anchor point that is placed above the level of the Dorsal D-Ring of the user’s harness. However, while working on rooftops, beams, etc, the blocks may be required to be anchored horizontally. Not all blocks can be anchored at this level.

Austlift Sharp edge tested blocks can be used in horizontal condition, and in such conditions where the worker is exposed to a sharp edge hazard. The integrated energy absorber pack helps to reduce the impact of forces of the cable, as it comes in contact with the sharp edge. Each block in this rang is constructed in such a way that if subjected to contact with a sharp edge in the event of a fall from a roof/Terrance etc, the retracted lanyard remains intact, while arresting the fall immediately. These block are equipped with an external energy absorber (with protective cover) which reduces the dynamic load impact felt on the user in the event of a fall, to less than 6kN even when the lifeline is fully drawn.

Conforms for the vertical usage as per EN 360:2003 and Horizontal usage as per V11 RFU#11.060.

Extremely light weight of 983g with inbuilt textile shock pack and removable protective cover. Casing made of robust and durable polymer. Can be used for horizontal and foot level anchorage (passes test for fall factor two). Comes with Steel Quarter Turn Locking Hook or Aluminium Scaffolding Hook.