Davey Water Pressure Systems HM
Automatic pressure system for household and domestic water supply, farming and agricultural water systems, irrigation and turf watering systems and automatic general water transfer.
| Model | Motor P1 kW | Motor P2 kW | Amps Run | Amps Start | Inlet | Outlet | Nominal Operating Pressure kPa | Maximum Pump Pressure kPa | Tank Air Pre-charge kPa | Nominal Flow l/m | Net Weight | Dimensions (mm) LxWxH |
| HM60-06T | 0.85 | 0.58 | 4 | 18 | 1 1/4″ F | 1″ M | 280 | 460 | 320 | 60 | 12.7kg | 411 x 171 x 410 |
| HM90-13T | 1.7 | 1.4 | 7.2 | 40 | 1 1/4″ F | 1″ M | 480 | 680 | 475 | 90 | 23.6kg | 503 x 206 x 435 |
| HM160-15T | 1.9 | 1.5 | 8 | 40 | 1 1/2″ F | 1″ M | 340 | 460 | 320 | 160 | 23.2kg | 510 x 206 x 435 |
| HM270-25P | 3.2 | 2.5 | 13.8 | 66 | 2″ F | 1 1/2″ F | 250 | 400 | 230 | 270 | 33.4kg | 562 x 206 x 280 |
- Features a Torrium2 Controller
- Horizontal multistage centrifugal pump with all hydraulic parts in stainless steel. Suitable for high water temperatures. Corrosion and wear resistant
- Axial suction and vertical discharge – Compact design, easy to install
- Stainless steel impellers with high efficiency impeller profile and thick self-centring impeller neck rings for high efficiency, reduced power consumption and low noise output
- Air purging valve and stage porting, Easier priming, less susceptible to air leaks, improved dependability.
- Impellers mounted directly on extended motor shaft: maximise performance per stage, high efficiency, long motor and pump life, and increased wear resistance.
- Pump casing assembly attached to motor bracket at 8 points with o-ring seal: complete stainless casing, better sealing and longer service life
- Davey built, totally enclosed fan cooled (TEFC) electric motor: Single-phase motors have built in thermal overload protection with automatic reset and 1.8m long power lead and Australian 3 pin plug. Sealed and greased for life motor bearings, over sized drive bearing. Longer life, easy service, economical and quiet running