8000L Outdoor Dangerous Goods Cabinet

This outdoor DG store is designed for the safe and secure outdoor IBC storage of eight (8) IBCs or up to 8000L of chemicals.

Available in a variety of styles to accommodate different dangerous substances, these units are ideal for the safe and secure outdoor IBC storage of flammable, corrosive, toxic or oxidising agents, or for organic peroxides.

• Store up to 8000L of flammable liquids / corrosive substances / toxic substances / oxidising agents / organic peroxides.
• Suitable for a storing 32x 205L drums or 8x 1000-litre IBCs.
• Eliminate the cost and time required to build a permanent outdoor dangerous goods storage cabinet.
• Manufactured with a rear-sloping roof with gutter for rainwater run-off.
• Heavy duty zinc anneal steel construction.
• Corrosive storage only: Integral spill containment bund with durable, thermoplastic powder coating for added corrosion protection
• This outdoor dangerous goods storage cabinet can be easily moved and transported to another site.
• Full width forklift tyne pockets allows access from both sides.
• Safety and warning signage applied in accordance with Australian Standards.
• Includes an integral spill containment bund which is compliant with Australian Standards and includes an externally-accessible drain.
• Includes a welded earth lug and earth stake (supplied loose for site installation).
• Relocatable outdoor IBC stores are ventilated in accordance with Australian Standards.
• Storage within this outdoor dangerous goods store is above the sump not in it.
• Finished in high build 2-pack epoxy primer and semi-gloss 2-pack polyurethane yellow topcoat, for a total dry film build in excess of 200 microns and in accordance with AS 2312.1-2014.
• Tie down lugs are included on each side. Certified lifting lugs can be supplied upon request.

Australian Made and Owned

Flammable outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS1940-2017 – The storage and handling of flammable and combustible liquids
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Corrosive outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS3780-2023 – The storage and handling of corrosive substances
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Toxic outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS/NZS 4452:1997 – The storage and handling of toxic substances
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Oxidising outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS 4326-2008 – The storage and handling of oxidising agents
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings