1000L Outdoor Dangerous Goods Stores

Safely and securely store up to 1000L of dangerous goods in this Australian made outdoor IBC store.

Available in a variety of styles to accommodate different dangerous substances, these outdoor cabinets are ideal for the safe and secure storage of flammable liquids, corrosive substances, toxic substances or oxidising agents, or for organic peroxides.

• Store up to 1000L of flammable liquids / corrosive substances / toxic substances / oxidising agents / organic peroxides.
• Suitable for a storing 4x 205L drums or 1x 1000-litre IBC.
• Eliminate the cost and time required to build a permanent outdoor dangerous goods store.
• Manufactured with a rear-sloping roof with gutter for rainwater run-off.
• Heavy duty zinc anneal steel construction.
• Corrosive storage only: Integral spill containment bund with durable, thermoplastic powder coating for added corrosion protection
• Outdoor IBC stores can be easily moved and transported to another site.
• Full width forklift pockets allow access from both sides.
• Safety and warning signage applied in accordance with Australian Standards.
• Stores include an integral spill containment bund which is compliant with Australian Standards and includes an externally-accessible drain.
• Welded earth lug and earth stake (supplied loose for site installation).
• This 1000L outdoor IBC store is ventilated in accordance with Australian Standards.
• Storage within this outdoor dangerous goods store is above the sump not in it.
• Features an epoxy powder undercoat and UV-stabilised polyester powder topcoat.
• Tie down lugs are included on each side. Certified lifting lugs can be supplied upon request.

Australian Made and Owned

Flammable outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS1940-2017 – The storage and handling of flammable and combustible liquids
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Corrosive outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS3780-2023 – The storage and handling of corrosive substances
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Toxic outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS/NZS 4452:1997 – The storage and handling of toxic substances
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Oxidising outdoor dangerous goods stores are manufactured in Australia to meet the requirements of:

• AS 4326-2008 – The storage and handling of oxidising agents
• AS1319-1994 – Safety signs for the occupational environment
• ADG CODE 7.5 – Australian Dangerous Goods Code 2017 Edition 7.5
• AS2312-2014 – Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings