Stubby Eye Bolt – Swivel Eye Bolts G80 Series
Design
- Low carbon alloy material.
- Large eye size for utilised applications.
- Integrated ball bearing for swivelling under load.
- Marked with WLL, bolt size, batch and Austlift or AL.
Testing
- Proof tested at 2.5 x WLL with ball bearing installed.
- Destructive tested at 4 x WLL with ball bearing installed.
- All tested at 45 degree angles off axle line.
- Fatigue tested at 1.5x WLL, minimum 20000 time, in axle direction.
- Low temperature and cryogenic tested, at -20°C, minimum 25J.
- Magnetic crack tested on each eyebolt.
- Visual tested after assembled.
- Testing certificates available upon request.
Manufacturing
- Forged.
- Heat treated.
- Powder coated finishing.
| CODE | SIZE (mm) | PITCH (mm) | WLL (T) | Wt. (kg) | DIMENSIONS (mm) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0° | 90° | A | B | C | D | E | F | ||||
| 605008 | M8 | 1.25 | 0.8 | 0.3 | 0.11 | 38 | 26 | 45.3 | 11.5 | 25 | 8 |
| 605010 | M10 | 1.5 | 1 | 0.4 | 0.12 | 38 | 26 | 45.3 | 14 | 25 | 8 |
| 605012 | M12 | 1.75 | 2 | 0.75 | 0.2 | 43.5 | 32 | 54 | 17 | 33 | 10 |
| 605016 | M16 | 2.00 | 4 | 1.5 | 0.35 | 52 | 37.5 | 63.5 | 24 | 36 | 14 |
| 605020 | M20 | 2.5 | 6 | 2.3 | 0.66 | 63 | 44.5 | 78.5 | 30 | 47.5 | 20.6 |
| 605024 | M24 | 3 | 8 | 3.2 | 1.1 | 74 | 51.6 | 92 | 35.3 | 53 | 20 |
| 605030 | M30 | 3.5 | 12 | 4.5 | 2.07 | 92 | 65 | 118 | 45 | 68 | 24 |
Warning
- Swivel ring bolts should be tightened by spanner with torque wrench.
- These ring bolts are not designed for permanent rotating continuously.
- Not suitable for turning under full load at 90° in side loading position.
| METRIC | WORKING LOAD LIMIT FOR STUBBY EYE BOLT | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| LOADING METHOD |  |
 |
 |
 |
 |
 |
 |
||
| INCLINATION | 0° | 90° | 0° | 90° | SYMMETRIC | ASYMMETRIC | |||
| 0°-45° | 45°-60° | 0°-45° | 45°-60° | ||||||
| LOAD FACTOR | 2.6 | 1.0 | 5.2 | 2.0 | 1.4 | 1.0 | 2.1 | 1.5 | 1.0 |
| M8 | 0.8 | 0.3 | 1.6 | 0.6 | 0.42 | 0.3 | 0.63 | 0.45 | 0.3 |
| M10 | 1.0 | 0.4 | 2.0 | 0.8 | 0.56 | 0.4 | 0.84 | 0.6 | 0.4 |
| M12 | 2.0 | 0.75 | 4.0 | 1.5 | 1.0 | 0.75 | 1.58 | 1.1 | 0.75 |
| M16 | 4.0 | 1.5 | 8.0 | 3.0 | 2.1 | 1.5 | 3.15 | 2.2 | 1.5 |
| M20 | 6.0 | 2.3 | 12.0 | 4.6 | 3.2 | 2.3 | 4.83 | 3.4 | 2.3 |
| M24 | 8.0 | 3.2 | 16.0 | 6.4 | 4.5 | 3.2 | 6.7 | 4.8 | 3.2 |
| M30 | 12.0 | 4.5 | 24.0 | 9.0 | 6.3 | 4.5 | 9.4 | 6.7 | 4.5 |