Select Page

Pre-drilled Solid Eye Thimble

Pre-drilled Solid Eye Thimble
Pre-drilled Solid Eye Thimble - Image 2

FOR LIFTING PURPOSES

Solid thimbles are recommended where loads can be connected to a nolt or pin.

  • Made from heat treated high tensile steel material.
  • Hot dipped galvanised finish.
  • Other drilled hole sizes are available at additional charge.
  • Refer to the Australian Standards for advice on drilling larger hole sizes.
CODE SIZE (mm) MBF (kN) Wt. (kg) PRE DRILLED (HOLE SIZE) DIMENSIONS (mm)
A B C E W
302605 18 204 1.19 30 mm 130 90 28.5 20 30
302610 20 252 1.57 35 mm 140 100 31 22 35
302615 22 305 2.02 38 mm 150 110 33.5 24 38
302620 24 363 2.57 41 mm 170 120 36 26 41
302625 26 426 3.55 44 mm 180 130 39.5 29 44
302630 28 494 4.0 47 mm 200 140 42 31 47
302635 32 646 5.84 53 mm 220 160 47 35 53
302640 36 817 8.35 59 mm 250 180 53 40 59
302645 40 1010 11.28 65 mm 280 200 58 44 65