Ball-Fence Swing Gate
- The powder coated aluminium hoop is adjustable for gate opening width.
- Push/Pull handle with adhesive stickers to indicate direction of swing.
- Striker plate provides positive close and eliminates wrong way push through.
- Moulded plastic housing cover with built-in hazard panel.
- Fully adjustable hydraulic closer provides smooth/speed controlled closure.
- Built-in stainless steel stop pins and hold open feature.
- Axles run on four sealed stainless steel bearings top and bottom for a smooth trouble free operation.
- Precision cast aluminium construction reduces weight and increases working life. Designed for mounting to any round, flat or square surface.
- Stainless Steel Bearing Hinges top and bottom for trouble free operation
A self closing gate system designed to complement the Ball-Fence range
A robust self closing industrial swing gate system that can be supplied with new Ball-fence installations or retrofitted to existing Ball-fence sites. Ball-Fence Gates can be installed in minutes for left or right hand operation, opening inwards or outwards. With adjustable hoop length it ensures total flexibility of use.
Ball-Fence Gates come complete with a standard powder coated aluminium tubular hoop (42.4mm dia.) to suit a maximum 1750mm* opening for single gates. Hoops can be simply cut down to any length and fitted into the receiver tubes on the gate assembly.
*To fit into a Max Opening of 1750mm (Leaving clear opening of approx: 1630mm when gate is open). To fit into a Min Opening of 600mm (Leaving clear opening of approx: 480mm when gate is open)
| Description | Dimensions | Standard Rail Length | MAX Recommended Rail Length | MIN Recommended Rail Length | Clear Opening INCLUDES Base Plates | Clear Opening EXCLUDES Base Plates | Floor to Top of Rail |
| Ball-Fence Swing Gate | 1813 x 100 x 505 mm | 1500 mm | 2500 mm | 420 mm | 1630 mm | 1750 mm | REC 1040 mm |
Note:Ball-Fence posts should be mounted to pedestrian side of W-Beam posts
| Code | Image | Description |
| BFSG |  |
Ball Fence Swing Gate |
| BFSGDB |  |
Ball Fence Swing Gate Drop Bolt |
| BFGPWB-SM |  |
Ball Fence Gate Post For W-Beam Surface Mounted – Galvanised |
| BFSGHOP |  |
Ball Fence Swing Gate Hold Open Pin |
| BFSGP90SM-G |  |
Ball Fence Swing Gate Post 90 x 1000mm – Galvanised |
| BFSGP90SM |  |
Ball Fence Swing Gate Post 90 x 1000mm – Galvanised and Powder Coated |
| BFGHAN-P |  |
Ball Fence Gate Handle – Plastic |
| DGL43-G |  |
Double Gate Latch to suit 43mm OD – Galvanised |
| BFGPWB-SMY |  |
Ball Fence Gate Post For W-Beam Surface Mounted – Powder-Coated |
| KIT48 |  |
BFSG Linkage Rod With Cup Ends Replacement Kit |
| KIT23 |  |
Fixing Kit for Gate to Post – suits up to 63mm Diameter Post |
| KIT24 |  |
Fixing Kit for Gate to Post – suits up to 90mm Diameter Post |
| BFSG-NW |  |
Ball Fence Swing Gate Mounting Kit For NoWeld |