Select Page

Pipe Saddle 16 Bar – Poly Compression Fitting

Pipe Saddle 16 Bar - Poly Compression Fitting
Pipe Saddle 16 Bar - Poly Compression Fitting - Image 2

Plastic pipe saddles or Tapping Saddles for secondary branch lines suitable for use on PE for compressed air, PVC or PP irrigation, high pressure conveyance of water, chemical solutions and slurries.

  • Range – Clamping body from Ø20mm tp to Ø63mm
  • Threaded take-off – From Ø1/2″ to Ø4″
  • Pressure Rating – 16 bar at 20°C for 20mm up to Ø63mm saddles
  • Safety Factor – 2 x Working Pressure (max 32 bar)
  • Materials Body – Polypropylene copolymer PP-B
  • O-Ring – Elastomeric rubber
  • Reinforced Ring – Stainless Steel
  • Bolts – Galvanised Steel or Stainless Steel
Code Pipe x Thread Bolts A B C D bar @ 20°C Weight g
PS020015 20 x 1/2 2 60 46 32 37 16 63.9
PS025015 25 x 1/2 2 72 45 30 50 16 63.9
PS025020 25 x 3/4 2 73 49 33 50 16 61.4
PS032015 32 x 1/2 2 73 55 36 49 16 74.5
PS032020 32 x 3/4 2 72 58 37 49 16 72
PS040015 40 x 1/2 2 90 69 45 61 16 107
PS040020 40 x 3/4 2 90 70 46 61 16 104
PS040025 40 x 1 2 90 72 47 60 16 109
PS050015 50 x 1/2 4 96 89 44 60 16 164
PS050020 50 x 3/4 4 93 78 48 60 16 164
PS050025 50 x 1 4 94 80 51 67 16 166
PS050040 50 x 1 1/4 4 95 89 58 69 16 166
PS063015 63 x 1/2 4 108 87 50 61 16 174
PS063020 63 x 3/4 4 109 90 53 60 16 175
PS063025 63 x 1 4 109 94 57 60 16 175
PS063032 63 x 1 1/4 4 109 98 61 77 16 205
PS063040 63 x 1 1/2 4 109 98 61 77 16 214